M600/1
Monoblock Class D Marine Subwoofer Versterker, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 Ω load (14.4V, 1% THD).
Specificaties:
Rated Continuous (RMS) Vermogen @ 14.4V
| @ 4 Ω |
400 W RMS x 1 |
| @ 3 Ω |
500 W RMS x 1 |
| @ 2 Ω |
600 W RMS x 1 |
| @ 1.5 Ω |
N/A |
Rated Continuous (RMS) Vermogen @ 12.5V
| @ 4 Ω |
300 W RMS x 1 |
| @ 3 Ω |
400 W RMS x 1 |
| @ 2 Ω |
500 W RMS x 1 |
| @ 1.5 Ω |
N/A |
Algemene specificaties:
| Frequency Response |
7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω |
>1000 / 50 Hz |
| Damping Factor @ 2 Ω |
>500 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs |
100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
| Fuse Rating |
50 A (AFS, AGU or MaxiFuse™) |
Signal processing:
| Filter Mode(s) |
Low-Pass only |
| Filter Slope(s) |
12/24 dB/octave |
| Filter Frequency Range |
50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer |
Yes |
| Filter Defeat Function |
Yes |
| Infrasonic Filter |
30 Hz, defeatable |
| Bass Boost EQ (0 to +12 dB @ 45 Hz) |
No |
| Output Polarity Switch |
No |
| Remote Subwoofer Level Control |
Optional (HD-RLC) |
| Pass-Through Preamp Output |
Buffered |
Afmetingen:
| Hoogte (H) |
52 mm |
| Breedte (W) |
216 mm |
| Diepte (D) |
180 mm |
| Net Gewicht |
2.06 kg |